dracut (106-5~bpo12+1) bookworm-backports; urgency=medium

  * Rebuild for bookworm-backports.

 -- Thomas Lange <lange@debian.org>  Wed, 26 Feb 2025 15:04:18 +0100

dracut (106-5) unstable; urgency=medium

  * disable upstream test 43

 -- Thomas Lange <lange@debian.org>  Sat, 22 Feb 2025 14:06:40 +0100

dracut (106-4) unstable; urgency=medium

  * skip upstream test 12, time out on Debian

 -- Thomas Lange <lange@debian.org>  Fri, 21 Feb 2025 17:53:33 +0100

dracut (106-3) unstable; urgency=medium

  * disable autopkgtest for s390x, Closes: #1096001
  * debian/rules: remove dracut.html which does not exist

 -- Thomas Lange <lange@debian.org>  Thu, 20 Feb 2025 11:02:07 +0100

dracut (106-2) unstable; urgency=medium

  * new patches (all accepted upstream):
    - test(ISCSI): skip root=ibft if qemu -acpitable is not supported
    - test(FULL-SYSTEMD): skip encrypted root if qemu -smbios is not supported
    - test: use persistent names for network devices
    - fix(dracut-install): install compressed blobs that match wildcard fwpath
      (LP: #2095518)
  * autopkgtest: explicitly depend on ipxe-qemu
  * dracut-core: install upstream dracut.conf.d subdirectories
    (to be used with --confdir)
  * Enable autopkgtest for s390x

 -- Benjamin Drung <bdrung@debian.org>  Thu, 13 Feb 2025 01:05:51 +0100

dracut (106-1) unstable; urgency=medium

  * New upstream release.
  * Update debian/watch to point to dracut-ng upstream
  * dracut-live: suggest isomd5sum (for checkisomd5 command) (Closes: #1095162)
  * dracut-core: install /usr/lib/kernel/install.d (Closes: #1082811)
  * Drop patches included upstream and refresh remaining patches
  * Move modules:
    - reserve range 50-59 to out of tree dracut modules
    - fix(shell-interpreter): move later in the module ordering
    - move 01systemd-sysusers to 60systemd-sysusers
  * dracut-core: remove moved upstream docs
  * dracut-core: drop dracut.html (please use man pages instead)
  * dracut-core: add new modules 01systemd-battery-check and 97systemd-emergency
  * test: reorganize tests (new numbering schema)
  * Run upstream autopkgtest as root
  * test: depend on dbus and systemd-container for TEST-41-FULL-SYSTEMD
  * new patches:
    - test: log error when constructing sysroot
    - test(FULL-SYSTEMD): skip systemd-network-management if missing
  * dracut-core: drop gawk dependency

 -- Benjamin Drung <bdrung@debian.org>  Fri, 07 Feb 2025 21:21:31 +0100

dracut (105-3) unstable; urgency=medium

  * Add patches to improve test cases in error case
  * autopkgtest: add TEST-20-NFS test

 -- Benjamin Drung <bdrung@debian.org>  Tue, 07 Jan 2025 10:25:32 +0100

dracut (105-2) unstable; urgency=medium

  * autopkgtest:
    - run network tests with systemd-networkd
    - drop explicit gawk dependency
    - run test with zstd
    - restrict to amd64 again (Closes: #1087834)
    - update reasons for skipped tests
    - run tests with V=1
    - drop unneeded vim and iputils-ping dependencies
    - rename upstream-dracut-network to upstream-dracut-network-nbd
  * disable using DH_VERBOSE=1
  * fix(iscsi): include /usr/lib/open-iscsi/startup-checks.sh if needed
    (LP: #2081172)
  * Add upstream metadata
  * Let dracut-network recommend iscsiuio (for iscsi module)
  * fix(dracut-init): add compatibility with Debian/Ubuntu for libdirs detection

 -- Benjamin Drung <bdrung@debian.org>  Thu, 21 Nov 2024 14:30:47 +0100

dracut (105-1) unstable; urgency=low

  [ Thomas Lange ]
  * new upstream, Closes: #1081566
  * add systemd-cryptsetup as Recommends, Closes: #1078792
  * add Benjamin as uploader
  * update standards version, no changes needed
  * instead of depend on init, now recommend systemd-sysv, Closes: #1056382
  * Do not call clean target in tests, Closes: #1086085

  [ Benjamin Drung ]
  * dracut-core:
    - add new modules 00shell-interpreter, 01fips-crypto-policies,
      01systemd-bsod, 01systemd-creds, 90numlock, 90pcmcia
    - drop recommending pkgconf
    - drop depending directly on libkmod2. dracut-install links against it.
    - recommend zstd instead of pigz and default to zstd
  * Switch to debhelper 13
  * dracut: use await variant of update-initramfs trigger
  * drop nm-path patch (network-manager ships the helpers in /usr/libexec)
  * Add systemd-coredump, systemd-cryptsetup, and systemd-repart as
    dependencies for upstream-dracut-core autopkgtest.
  * Regenerate only the latest and missing initrds (LP: #2048990)
  * Move module 95nvmf from dracut-core to dracut-network (LP: #2083881)
  * Drop unneeded quilt from build dependencies
  * Default initrdname to initrd.img-${kernel}
  * Enable all hardening flags
  * fix-01fips-crypto-policies-use-bin-in-shebang.patch: use /bin in shebang
  * Add a dracut-test package to ship the files needed for the test suite
  * autopkgtest:
    - run autopkgtest with V=2 (for maximum verbosity)
    - run autopkgtest on all architectures
    - disable using KVM for ppc64el
    - set ARCH to dpkg architecture
    - Depend on ovmf, squashfs-tools, and systemd-ukify for TEST-18-UEFI
    - Depend on systemd-cryptsetup for TEST-40-NBD
    - restrict systemd-boot-efi to supported archs
  * dracut-config-generic: ship upstream 50-generic.conf instead of Debian
    specific one and put it into /usr/lib/dracut/dracut.conf.d
  * dracut-config-rescue: ship upstream 50-rescue.conf instead of Debian
    specific one and put it into /usr/lib/dracut/dracut.conf.d
  * Set Rules-Requires-Root: no
  * test: decrease default VM memory size to 1 GiB
  * Run wrap-and-sort

 -- Benjamin Drung <bdrung@debian.org>  Thu, 14 Nov 2024 12:29:30 +0100

dracut (103-2) unstable; urgency=low

  * control: add depends on gawk, init, Closes: #1056382, #1081005

 -- Thomas Lange <lange@debian.org>  Wed, 11 Sep 2024 11:16:43 +0200

dracut (103-1.1) unstable; urgency=medium

  * no changes non-maintainer upload to rebuild the package with a newer
    libkmod2 (see #1079022)

 -- Marco d'Itri <md@linux.it>  Tue, 20 Aug 2024 23:36:24 +0200

dracut (103-1) unstable; urgency=low

  * new upstream version 103
  * sync and delete patches
  * add new dracut module

 -- Thomas Lange <lange@debian.org>  Thu, 25 Jul 2024 13:30:18 +0900

dracut (102-3) unstable; urgency=medium

  * add module net-lib, Closes: #1072744
  * remove obsolete patch fido-libz

 -- Thomas Lange <lange@debian.org>  Fri, 07 Jun 2024 13:57:47 +0200

dracut (102-2) unstable; urgency=medium

  * add 90systemd-cryptsetup module, Closes: 1072538

 -- Thomas Lange <lange@debian.org>  Tue, 04 Jun 2024 11:38:08 +0200

dracut (102-1) unstable; urgency=low

  * new upstream:
    Closes: 1029324, 1041614, 1022129, 1071592, 1072174, 1068250
    Closes: 1071182, 1059501
  * change to new dracut-ng upstream repository, the package name remains
    unchanged
  * apply salsa MR #11, Closes: 753752
  * move kpartx from depends to recommends, Closes: 1033158

 -- Thomas Lange <lange@debian.org>  Mon, 03 Jun 2024 14:14:11 +0200

dracut (060+5-8) unstable; urgency=low

  * control: adjust breaks, replaces, Closes: #1071208, #1071244
  * add patch taken from dracut-ng, Closes: #1071182

 -- Thomas Lange <lange@debian.org>  Sun, 19 May 2024 16:45:33 +0200

dracut (060+5-7) unstable; urgency=low

  * control: update package depends name
  * add lintian override

 -- Thomas Lange <lange@debian.org>  Mon, 01 Apr 2024 23:01:58 +0200

dracut (060+5-2) unstable; urgency=low

  * set --systemdsystemunitdir from pkg-config, MR #32, Closes: #1057927
  * split dracut-install into separate package for initramfs-tools, MR #27
  * enable autopkgtest test suite, MR #24

 -- Thomas Lange <lange@debian.org>  Sun, 31 Mar 2024 19:05:19 +0200

dracut (060+5-1) unstable; urgency=medium

  * upstream changed the release process, and do not tag the releases any
    more
  * 059+212 was already version 060+5
  * add dracut-network.conffiles, Closes: 1057807

 -- Thomas Lange <lange@debian.org>  Fri, 08 Dec 2023 21:09:47 +0100

dracut (059+212-3) unstable; urgency=medium

  * fix handling of dracut-version.sh

 -- Thomas Lange <lange@debian.org>  Wed, 06 Dec 2023 14:36:26 +0100

dracut (059+212-2) unstable; urgency=low

  * debian/rules: use correct Debian version

 -- Thomas Lange <lange@debian.org>  Wed, 06 Dec 2023 12:00:30 +0100

dracut (059+212-1) unstable; urgency=low

  * merge upstream changes, Closes: #1056059, #1041562, #1054400, #1016052

 -- Thomas Lange <lange@debian.org>  Thu, 30 Nov 2023 22:10:02 +0100

dracut (059-4) unstable; urgency=low

  * Fix file name in patch initrd-not-initramfs.patch
    Closes: #1029413, #1030191
    Thanks to nabijaczleweli for the patch

 -- Thomas Lange <lange@debian.org>  Thu, 09 Mar 2023 19:13:42 +0100

dracut (059-3) unstable; urgency=low

  * control: add breaks + replaces, Closes: #1028303

 -- Thomas Lange <lange@debian.org>  Mon, 09 Jan 2023 20:56:29 +0100

dracut (059-2) unstable; urgency=low

  * add patches from Laszlo Gombos
    dracut-live only depends on dracut-core not on dracut-network
    overlayfs dracut module belongs to dracut-core and not to dracut-live
    wicked dracut module is not supported by debian
    remove multipath patch, no longer needed

 -- Thomas Lange <lange@debian.org>  Sat, 07 Jan 2023 11:43:33 +0100

dracut (059-1) unstable; urgency=low

  * new upstream version
  * control: new homepage, new standards version
  * remove 10-debian.conf, build generic initrd by default
  * rules: run script explicitly as shell, Closes: #1025378
  * nm-path: fix more paths, Closes: #1016741
  * patches/udevsettle: fix broken network in kvm in some cases
  * remove dev-shm patch which is not needed, Closes: #1025996
  * remove systemd-users patch, Closes: #1025951

 -- Thomas Lange <lange@debian.org>  Sun, 25 Dec 2022 17:09:02 +0100

dracut (057+157-4) unstable; urgency=low

  * add missing module 90overlayfs

 -- Thomas Lange <lange@debian.org>  Fri, 02 Dec 2022 16:19:16 +0100

dracut (057+157-3) unstable; urgency=low

  * control: add breaks and replaces, Closes: #1024435

 -- Thomas Lange <lange@debian.org>  Sun, 20 Nov 2022 08:56:26 +0100

dracut (057+157-2) unstable; urgency=low

  * remove duplicate virtfs module, Closes: #1024390

 -- Thomas Lange <lange@debian.org>  Fri, 18 Nov 2022 20:54:29 +0100

dracut (057+157-1) unstable; urgency=low

  * new upstream: Closes: #1023239, #1015922, #1016051, #1017411
  * update initrd-not-initramfs.patch Closes: #1021229
  * add patch for missing libz, Closes: #1016727
  * add patch for Debian path in 35network-manager, Closes: #1016741

 -- Thomas Lange <lange@debian.org>  Thu, 17 Nov 2022 21:48:24 +0100

dracut (056-3) unstable; urgency=low

  * new upstream, Closes: #991918
  * control: Remove unnecessary constraints, demote pkg-config to
    Recommends, Closes: #991920
  * set Debian version in dracut-version.sh, Closes: #987320
  * 90overlay-root/module-setup.sh: fix loading overlayfs kernel module

 -- Thomas Lange <lange@debian.org>  Tue, 24 May 2022 21:29:13 +0200

dracut (056-2) experimental; urgency=low

  * Team upload.
  * Fix conflict between dracut-{core,live,network} after failed amendment
    of modules list

 -- Dominik George <natureshadow@debian.org>  Wed, 11 May 2022 12:39:03 +0200

dracut (056-1) experimental; urgency=low

  * Team upload.
  * New upstream version
  * Refresh patches for dracut 056
  * Update d/copyright
    + Accounted for moved source files
    + Accounted for source files written by authors not mentioned yet
    + Accounted for a vendored Rust module (crosvm).
  * Install all modules
  * Install dracut-util

 -- Dominik George <natureshadow@debian.org>  Tue, 10 May 2022 16:53:52 +0200

dracut (055-1) experimental; urgency=low

  [ Dominik George ]
  * Team upload.
  * New upstream version (Closes: #991918)

  [ Andre Russ ]
  * Refresh patches for dracut 055
    + systemd needs more users in Debian
    + crc32c patch was applied upstream
    + several minor changes
  * Update installed files
    + Several docs were moved upstream
    + mkinitrd was removed

 -- Dominik George <natureshadow@debian.org>  Fri, 06 Aug 2021 11:36:31 +0200

dracut (051-1) unstable; urgency=low

  * new upstream version
  * control: change description, Closes: #967923
  * source/options: add pattern for files to ignore by dpkg-source
  * fix-revdate: update modification dates

  [ Antonio Russo ]
  * Patch occurrences of /boot/initramfs to /boot/initrd to match Debian
    default names, Closes: #972809

 -- Thomas Lange <lange@debian.org>  Tue, 15 Dec 2020 16:23:33 +0100

dracut (050+65-1) unstable; urgency=medium

  * control: add breaks and replaces, Closes: #959852
  * merge upstream changes, Closes: #963989
  * add module nvmf

 -- Thomas Lange <lange@debian.org>  Wed, 01 Jul 2020 12:13:36 +0200

dracut (050+35-4) unstable; urgency=high

  * add git tag, so dracut shows correct version

 -- Thomas Lange <lange@debian.org>  Wed, 22 Apr 2020 22:43:28 +0200

dracut (050+35-3) unstable; urgency=high

  * fix microcode loading, Closes: #958191

 -- Thomas Lange <lange@debian.org>  Wed, 22 Apr 2020 22:09:22 +0200

dracut (050+35-2) unstable; urgency=low

  * source only upload needed, after 050+35-1 went through new queue

 -- Thomas Lange <lange@debian.org>  Thu, 16 Apr 2020 10:55:04 +0200

dracut (050+35-1) unstable; urgency=low

  * new upstream
  * debian/copyright: fix entries, Closes: #956288

 -- Thomas Lange <lange@debian.org>  Fri, 10 Apr 2020 21:57:03 +0200

dracut (050+31-1) unstable; urgency=low

  * new upstream: Closes: #954019
  * add module 90nvdimm

 -- Thomas Lange <lange@debian.org>  Thu, 19 Mar 2020 23:01:22 +0100

dracut (050-1) unstable; urgency=low

  [ Thomas Lange ]
  * new upstream version, Closes: #948135, #945596, #952820
  * additional packages dracut-live and dracut-squash were added by
    upstream
  * fix dpkg triggers, Closes: #720081
  * kernel/postinst.d/dracut: avoid running multiple times
  * update standards version
  * control: use debhelper-compat, upgrade to 12
  * add patch systemd-vconsole-setup.service
  * remove 90aufs, only supported until 3.X
  * add dracut module 06rngd
  * add README.cross, rename README -> README.md
  * add mkinitrd script

  [ Ondřej Nový ]
  * d/copyright: Change Format URL to correct one

 -- Thomas Lange <lange@debian.org>  Fri, 06 Mar 2020 13:30:46 +0100

dracut (048+80-2) unstable; urgency=medium

  * fix bashism in several scripts, Closes: #772260
  * add patch to workaround changes in bash-5 while fsck'ing,
    Closes: #920563

 -- Thomas Lange <lange@debian.org>  Tue, 07 May 2019 13:11:11 +0200

dracut (048+80-1) unstable; urgency=low

  * new upstream
  * fix duplicate copy of README.Debian: Closes: #905281
  * 10-debian.conf: remove prelink option
  * remove 02fips-aesni, 90multipath-hostonly
  * new standards version

 -- Thomas Lange <lange@debian.org>  Fri, 24 Aug 2018 14:29:22 +0200

dracut (047+31-2) unstable; urgency=low

  [ Helmut Grohne ]
  * Fix FTCBFS: Let buildtools.mk export PKG_CONFIG etc. Closes: #901173

  [ Thomas Lange ]
  * add patch for adding crc32c when using ext3

 -- Thomas Lange <lange@debian.org>  Tue, 12 Jun 2018 13:29:28 +0200

dracut (047+31-1) unstable; urgency=medium

  * new upstream version
  * add patch for early microcode loading, Closes: #875297
  * rules: remove quilt option
  * control: update standards version, no changes
  * 10-debian.conf: crc32c modules not needed any more
  * add dracut.pc to debian-core, Closes: #880984

 -- Thomas Lange <lange@debian.org>  Thu, 17 May 2018 17:44:36 +0200

dracut (047-2) unstable; urgency=low

  * add missing depends, Closes: #890990

 -- Thomas Lange <lange@debian.org>  Wed, 21 Feb 2018 14:55:16 +0100

dracut (047-1) unstable; urgency=low

  * new upstream version
  * control: add depends, Closes: #887202, update Vcs fields,
    update standards version
  * add modules.d/81cio_ignore

 -- Thomas Lange <lange@debian.org>  Wed, 21 Feb 2018 09:49:15 +0100

dracut (045+132-1) unstable; urgency=low

  * new upstream version, Closes: #867568, #862845, #743791
  * replace crc32 patch by adding driver to entry in dracut.conf.d
  * add lvmmerge and multipath-hostonly modules
  * make man pages reproducible, Thanks to Jeremy Bobbio for the
    patch, Closes: #783131

 -- Thomas Lange <lange@debian.org>  Fri, 11 Aug 2017 22:05:11 +0200

dracut (044+241-3) unstable; urgency=low

  * control: fix Recommends, Closes: #852083

 -- Thomas Lange <lange@debian.org>  Wed, 22 Mar 2017 18:52:25 +0000

dracut (044+241-2) unstable; urgency=low

  * add patch for dkms aufs modules, Closes: #855370

 -- Thomas Lange <lange@debian.org>  Tue, 28 Feb 2017 11:29:58 +0100

dracut (044+241-1) unstable; urgency=low

  * merge upstream changes
  * 09console-setup/module-setup.sh: fix cp, Closes: #828915
  * control: add recommends, Closes: #852083

 -- Thomas Lange <lange@debian.org>  Tue, 24 Jan 2017 14:40:24 +0000

dracut (044+223-1) unstable; urgency=low

  * new upstream
  * control: only depend on asciidoc-base

 -- Thomas Lange <lange@debian.org>  Tue, 17 Jan 2017 16:20:51 +0100

dracut (044+189-2) unstable; urgency=high

  * rules: set libdir
  * set compat level to 9, Closes: #830229

 -- Thomas Lange <lange@debian.org>  Wed, 14 Dec 2016 11:41:52 +0000

dracut (044+189-1) unstable; urgency=high

  * upgrade to a newer upstream: Closes: #843697, which is CVE-2016-8637
  * dracut.maintscript: remove parameter from mainscript, Closes: #839951
  * new patch crc32, adding crc32c driver for ext4, Closes: #835060

 -- Thomas Lange <lange@debian.org>  Tue, 13 Dec 2016 21:45:01 +0100

dracut (044+109-1) unstable; urgency=low

  * merge upstream 044+109+g3889234
  * update standards version, no changes needed
  * add README.Debian
  * add patch systemd-udev
  * add check for aufs and overlayfs if filesystem is supported

 -- Thomas Lange <lange@debian.org>  Sun, 31 Jul 2016 21:18:04 +0200

dracut (044+105-2) unstable; urgency=medium

  * overlay-mount.sh: remove debuging

 -- Thomas Lange <lange@debian.org>  Mon, 27 Jun 2016 17:00:26 +0200

dracut (044+105-1) unstable; urgency=medium

  * merge upstream 044-105-gf6fa9ef
  * add overlayfs support for the root file system

 -- Thomas Lange <lange@debian.org>  Sat, 25 Jun 2016 16:10:25 +0200

dracut (044+38-1) unstable; urgency=low

  * merge upstream 044+38+gb127294
  * make console-setup a recommends instead of depends, Closes: #812943
  * 90console-setup: Fix console-setup module-setup script to not
    terminate
  * rules: fix permissions

 -- Thomas Lange <lange@debian.org>  Mon, 21 Mar 2016 13:47:15 +0100

dracut (044+3-3) unstable; urgency=low

  * add dracut.maintscript, so the duplicate logrotate entry is removed

 -- Thomas Lange <lange@debian.org>  Sun, 20 Mar 2016 21:03:49 +0100

dracut (044+3-2) unstable; urgency=medium

  [ Ben Hutchings ]
  * Split dracut binary package into core and automation hooks,
    Closes: #808787

 -- Thomas Lange <lange@debian.org>  Wed, 23 Dec 2015 23:13:50 +0100

dracut (044+3-1) unstable; urgency=low

  * new upstream, Closes: #802823
  * new patch libdir, multipath Closes: #796329
  * fix plymouth path and remove items, Closes: #796110
  * dracut.install: add dracut-init.sh
  * aufs-mount.sh: use getargbool

 -- Thomas Lange <lange@debian.org>  Sun, 29 Nov 2015 13:49:04 +0100

dracut (043-4) unstable; urgency=low

  * add more man pages to package

 -- Thomas Lange <lange@debian.org>  Thu, 17 Sep 2015 03:34:44 +0200

dracut (043-3) unstable; urgency=low

  * dracut-network: activate ifcfg module

 -- Thomas Lange <lange@debian.org>  Mon, 07 Sep 2015 12:56:46 +0200

dracut (043-2) unstable; urgency=medium

  * control: add breaks and replaces, Closes: #796163

 -- Thomas Lange <lange@debian.org>  Thu, 20 Aug 2015 11:56:25 +0200

dracut (043-1) unstable; urgency=low

  * new upstream, Closes: #771413
  * control: add packages dracut-config-{rescue,generic} which include
    config files how dracut will build the initrd
  * 10-debian.conf: generate hostonly initrd by default
  * aufs module: transform aufs patch to files in a directory, use --bind
    instead of --move, move module from dracut-network to dracut,
    make aufs independent of nfs

 -- Thomas Lange <lange@debian.org>  Wed, 12 Aug 2015 22:27:18 +0200

dracut (040+1-1) unstable; urgency=low

  * new upstream, Closes: #739794, #758655, #754062, #755271

 -- Thomas Lange <lange@debian.org>  Fri, 24 Oct 2014 15:32:38 +0200

dracut (038-3) unstable; urgency=low

  * add systemd units to package Closes: #764393
  * add patch for dracut-initramfs-restore, Closes: #764393
    Thanks to Lukas Wunner for the patch

 -- Thomas Lange <lange@debian.org>  Wed, 08 Oct 2014 11:55:35 +0200

dracut (038-2) unstable; urgency=low

  * control: change depends on kbd to console-setup

 -- Thomas Lange <lange@debian.org>  Thu, 17 Jul 2014 13:40:08 +0200

dracut (038-1) unstable; urgency=low

  * new upstream
  * remove 10i18n patch, not needed any more
  * update standards version, no changes needed

 -- Thomas Lange <lange@debian.org>  Thu, 03 Jul 2014 15:12:26 +0200

dracut (037-2) unstable; urgency=low

  * add i18n support for Debian using new module 09-console-setup,
    Closes: #640101, Thanks to Anton Zinoviev for the patches
  * add README.Debian, which includes info about i18n in Debian
  * disable module 10i18n, Closes: #664678
  * control: add pkg-config to depends, Closes: #748084
  * add dracut-version.sh to package, Closes: #749849

 -- Thomas Lange <lange@debian.org>  Mon, 16 Jun 2014 14:37:52 +0200

dracut (037-1) unstable; urgency=low

  * new upstream

 -- Thomas Lange <lange@debian.org>  Wed, 02 Apr 2014 22:26:45 +0200

dracut (036-1) unstable; urgency=low

  * new upstream, Closes: #720105
  * control: use kmod in depends, Closes: #733699
  * control: add conflicts, closes: #729809
  * control: change package description one liner
  * aufs: mount /cow with mode 0775, Closes: #737554
  * add NEWS.Debian
  * adjust patches
  * improve watch file

 -- Thomas Lange <lange@debian.org>  Mon, 17 Feb 2014 15:53:00 +0100

dracut (034-2) unstable; urgency=low

  * postinst, preinst: respect second argument, Closes: #729621
  * postinst: do nothing if no initrd is needed, Closes: #729622
    Thanks to Ben Hutchings for both patches

 -- Thomas Lange <lange@debian.org>  Fri, 15 Nov 2013 21:14:42 +0100

dracut (034-1) unstable; urgency=low

  * new upstream
  * patches/libdir: add space to string, Closes: #724514
  * debian/etc/10-debian.conf: disable prelink by default, Closes: #719608
  * dracut.install: remove bcache module

 -- Thomas Lange <lange@debian.org>  Wed, 09 Oct 2013 11:38:06 +0200

dracut (033-1) unstable; urgency=low

  * new upstream
  * fix path for resume binary, Closes: #708253

 -- Thomas Lange <lange@debian.org>  Thu, 19 Sep 2013 17:28:20 +0200

dracut (032-1) unstable; urgency=low

  * new upstream
  * add bash completion for lsinitrd
  * add bash module
  * postinst.d/dracut: remove code since dracut now handles multiarch lib
    dirs
  * refresh patches

 -- Thomas Lange <lange@debian.org>  Fri, 23 Aug 2013 13:18:38 +0200

dracut (031-2) unstable; urgency=low

  * control: move arch from all to any,
    add Multi-Arch line, Closes: #719610
  * use dracut-install executable instead of shell implementation
  * dracut.install,dracut-network.install: add all dracut modules

 -- Thomas Lange <lange@debian.org>  Fri, 16 Aug 2013 11:03:44 +0200

dracut (031-1) unstable; urgency=low

  * new upstream
  * update debian patches
  * control: add curl to recommends of dracut-network
  * copyright: add entry for dracut-install.c

 -- Thomas Lange <lange@debian.org>  Sun, 11 Aug 2013 11:49:45 +0200

dracut (027-1) unstable; urgency=low

  * new upstream
  * update copyright information

 -- Thomas Lange <lange@debian.org>  Thu, 28 Mar 2013 20:52:50 +0100

dracut (026+71+g78d1d4f-1) unstable; urgency=low

  * new upstream 026+71+g78d1d4f
  * add man pages
  * add bash completions
  * add cifs module to dracut-network
  * cleanup patches

 -- Thomas Lange <lange@debian.org>  Mon, 25 Mar 2013 14:03:36 +0100

dracut (020-2) unstable; urgency=low

  * use $kernel when calling modprobe: Closes: #685004

 -- Thomas Lange <lange@debian.org>  Wed, 07 Nov 2012 17:55:07 +0100

dracut (020-1.1) unstable; urgency=medium

  * Non-maintainer upload by the Security Team.
  * Fixing CVE-2012-4453: Create the initramfs non-world readable
    (Closes: #688956).

 -- Luk Claes <luk@debian.org>  Sun, 04 Nov 2012 18:47:50 +0100

dracut (020-1) unstable; urgency=low

  * new upstream version
  * disable building of dracut-install executable, the package should
    remain architecture all for now
  * add qemu modules

 -- Thomas Lange <lange@debian.org>  Sat, 30 Jun 2012 17:24:54 +0200

dracut (019+39+gf48f934-1) unstable; urgency=high

  * sync to upstream, get important fix for missing libraries needed for
    nfs module
  * add nogroup to /etc/group inside the initrd
  * use /etc/ld.so.conf.d/ for creating list of library pathes

 -- Thomas Lange <lange@debian.org>  Tue, 19 Jun 2012 10:30:39 +0200

dracut (019+9+g521c57a-1) unstable; urgency=high

  * import some upstream patches which fixes the "pkg-config command not
    found" errors
  * postinst.d/dracut: create modules.dep if it not already exists

 -- Thomas Lange <lange@debian.org>  Tue, 12 Jun 2012 16:59:41 +0200

dracut (019+1+gd77540c-1) unstable; urgency=medium

  * new upstream
  * add build-depends Closes: #674326
  * do not mount /dev/shm, Closes: #637286

 -- Thomas Lange <lange@debian.org>  Mon, 04 Jun 2012 16:59:14 +0200

dracut (018+32+geb6e141-1) unstable; urgency=low

  * add Debian multiarch support
  * dracut.postinst: do not use uname -r for kernel version
  * control: add depends on kbd
  * postinst.d/dracut: use --libdirs for multiarch support

 -- Thomas Lange <lange@debian.org>  Thu, 26 Apr 2012 17:46:53 +0200

dracut (018-2) unstable; urgency=low

  * postinst.d/dracut: only execute if dracut command is available
  * postrm.d/dracut: fix file name

 -- Thomas Lange <lange@debian.org>  Thu, 19 Apr 2012 10:25:02 +0200

dracut (018-1) unstable; urgency=low

  * new upstream version
  * control: dracut now uses asciidoc, add conflicts on initramfs-tools
  * postinst.d/dracut: new file name for initrd
  * add 80cms modules to dracut-network

 -- Thomas Lange <lange@debian.org>  Wed, 18 Apr 2012 13:30:05 +0200

dracut (017-1) unstable; urgency=low

  * new upstream version
  * do not call dracut if no kernel was found, fix code Closes: #657754
  * control: update to 3.9.3, no changes needed, add Build-depends
  * patches/aufs: aufs was always enabled, now aufs is only activated if
    the string aufs was given on the command line
  * control: update to Standards version 3.9.2, no changes needed, needs
    util-linux >= 2.20
  * debian/patches, rules: add quilt support
  * add aufs patch
  * control: fix VCS fields
  * add url-lib, img-lib, ssh-client modules
  * add add dracut-initramfs-restore
  * add patch for missing rpc user and group
  * add patch for missing unimaps directory Closes: #637296 #661531

 -- Thomas Lange <lange@debian.org>  Wed, 29 Feb 2012 20:15:50 +0100

dracut (013-5) unstable; urgency=high

  * do not call dracut if no kernel was found Closes: #657754

 -- Thomas Lange <lange@debian.org>  Tue, 14 Feb 2012 10:32:02 +0100

dracut (013-4) unstable; urgency=low

  * patches/aufs: aufs was always enabled, now aufs is only activated if
    the string aufs was given on the command line

 -- Thomas Lange <lange@debian.org>  Sat, 11 Feb 2012 12:14:23 +0100

dracut (013-3) unstable; urgency=low

  * add aufs module, for booting a read-only nfsroot and make it writeable
  * control: fix VCS fields, update to Standards 3.9.2, no changes needed

 -- Thomas Lange <lange@debian.org>  Mon, 16 Jan 2012 12:32:30 +0100

dracut (013-2) unstable; urgency=low

  * control: add Build-Depends Closes: #642683
  * control: add Depends on kpartx Closes: #636549

 -- Thomas Lange <lange@debian.org>  Mon, 26 Sep 2011 17:49:46 +0200

dracut (013-1) unstable; urgency=low

  * new upstream version, Closes: #636549
  * source/format: use 3.0 quilt format
  * control: fix Vcs-Browser Closes: #637305
  * add dracut.postrm, dracut.logrotate Closes: #637306
  * postrm.d,postinst.d: remove obsolete else part, Closes: #627023
  * add missing dracut.kernel.7
  * add fs-lib module to dracut
  * add livenet module to dracut-network
  * move znet and zfcp to dracut-network

 -- Thomas Lange <lange@debian.org>  Fri, 02 Sep 2011 11:51:41 +0200

dracut (011+36+gd727c5a-1) unstable; urgency=low

  * new upstream release Closes: #617893, #628190, #581092, #581091
  * new maintainer
  * dracut.install,dracut.dirs: remove non-existing modules, add
    dracut.logger, lsinitrd and new modules
  * rules: use new debhelper, no more cdbs
  * control: new URL for git repository, update dependencies, update to
    standards 3.9.1, add URL for homepage
  * add file watch
  * copyright: move to machine readable format, fix URLs
  * compat: update to 8
  * dracut.docs: add missing files, remove COPYING
  * postinst.d/dracut: add script that creates the initrd Closes: #627023
  * postrm.d/dracut: add script that removes initrd Closes: #627023

 -- Thomas Lange <lange@debian.org>  Wed, 03 Aug 2011 17:01:36 +0200

dracut (005-1) unstable; urgency=low

  * Version 005
  * First dracut release to unstable. Closes: #558274

 -- Philippe Seewer <philippe.seewer@bfh.ch>  Fri, 9 May 2010 11:20:00 +0100

dracut (004-1) unreleased; urgency=low

  * Version 004

 -- Philippe Seewer <philippe.seewer@bfh.ch>  Fri, 5 Mar 2010 15:25:00 +0100

dracut (003-1) unreleased; urgency=low

  * Version 003

 -- Philippe Seewer <philippe.seewer@bfh.ch>  Fri, 27 Nov 2009 15:52:00 +0100

dracut (002-1) unreleased; urgency=low

  * Version 002

 -- Philippe Seewer <philippe.seewer@bfh.ch>  Fri, 27 Nov 2009 15:52:00 +0100
