fprintd (1.90.9-1) unstable; urgency=medium

  [ Marco Trevisan (Treviño) ]
  * New upstream release:
    - Fix multiple daemon lockup issues (#97)
    - Fix print garbage collection to not delete used prints
    - pam: Use the device with the most prints
  * debian/control: Mark fprintd-doc as Multi-Arch: foreign

  [ Helmut Grohne ]
  * Fix nocheck FTFBS: Drop <!nocheck> from non-optional dependencies.
    (Closes: #977395)

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Thu, 21 Jan 2021 21:29:07 +0100

fprintd (1.90.8-1) unstable; urgency=medium

  * New upstream release
    - pam: Only listen to NameOwnerChanged after fprintd is known to run
    - Place new ObjectManager DBus API at /net/reactivated/Fprint
  * debian/patches: Remove all patches, applied upstream or not needed anymore
  * debian/control: Depend on systemd 235, but only in linux
  * debian/rules: Require systemd and set unit path only on linux
  * debian/fprintd.install: Use dh-exec to filter linux-only files

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Mon, 14 Dec 2020 21:32:29 +0100

fprintd (1.90.7-1) unstable; urgency=medium

  * New upstream release
    - Fix fprintd DBus configuration (Closes: #976990)
    - Change details of what requires authorization
    - Fix various race conditions in pam_fprintd
    - Permit interactive authorization from fprintd utilities
    - Do not allow deletion while another operation is ongoing
    - pam: Guard strdup calls against NULL pointers
  * debian/patches:
    - Refresh
    - Ignore NameOwnerChanged until fprintd is running

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Fri, 11 Dec 2020 00:03:27 +0100

fprintd (1.90.5-2) unstable; urgency=medium

  * debian/patches: Make tests run with actual required libfprint version
  * debian/control: Remove test-only dependency on libfprint 1.90.4.
    Tests are now working with older libfprint versions too
  * debian/control: Add myself to Uploaders
  * debian/gbp.conf: Include suggested settings by GNOME team.
    Even if fprintd is not part of GNOME I think these settings are good
    practice anyways.

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Thu, 03 Dec 2020 15:57:19 +0100

fprintd (1.90.5-1) unstable; urgency=medium

  * New upstream release:
    - Permit building with polkit older than 0.114
    - Fix possible issues with PAM test
    - Fix incorrect DBus policy
    - Fix build so that CFLAGS environment is correctly used
    - Skip hotplug test with older libfprint (which times out otherwise)
  * debian/patches: Drop patches applied upstream

 -- Marco Trevisan (Treviño) <marco@ubuntu.com>  Wed, 02 Dec 2020 05:35:33 +0100

fprintd (1.90.4-1) unstable; urgency=medium

  * Team upload.
  [ Marco Trevisan (Treviño) ]
  * New upstream release:
    - Use GDBus and async Polkit checks
    - Authentication is now required to enroll a new print (LP: #1532264,
      Closes: #719004)
    - Add support for the libfprint early reporting mechanism
    - Proper hotplug support together with libfprint 1.90.4
    - Handle STATE_DIRECTORY containing multiple paths
    - Various memory fixes (LP: #1888495)
  * debian/control:
    - Remove build dependency on dbus-glib (Closes: #955893)
    - Mark as <!nocheck> the packages required only for testing
    - Use debhelper 13
    - Bump libfprint-2 dependency on 1.90.4 on test case
  * debian/rules:
    - remove unneeded override to force --fail-missing (as per dh 13)
    - Increase tests timeout multiplier
  * debian/patches:
    - Refresh
    - Define auto-pointers functions if not defined:
      Fixes a build failure with debian polkit version.
    - Cleanup pam-wrapper temporary dir when running tests
    - Fix dbus-policy file to address lintian
    - Ensure we generate debug symbols in debian builds

  [ Laurent Bigonville ]
  * debian/control: Bump Standards-Version to 4.5.1 (no further changes)

 -- Laurent Bigonville <bigon@debian.org>  Tue, 01 Dec 2020 13:06:59 +0100

fprintd (1.90.1-2) unstable; urgency=low

  * Team upload.
  * Simplify the installation of the pam-config, do not install one
    configuration file per architecture
  * debian/NEWS: Add an news entry explaining that the user will have to
    re-enroll their fingerprints upon update to 1.90.1.

 -- Laurent Bigonville <bigon@debian.org>  Sun, 15 Nov 2020 16:22:57 +0100

fprintd (1.90.1-1) experimental; urgency=medium

  * Team upload.
  * New upstream release
    - Switch to meson (Closes: #830015)
    - Adjust the build-dependencies
  * debian/control: Bump Standards-Version to 4.5.0 (no further changes)
  * debian/control: Mark the -doc package with Build-Profiles: <!nodoc> and
    move gtk-doc-tools to the B-D-I

 -- Laurent Bigonville <bigon@debian.org>  Wed, 19 Feb 2020 14:01:10 +0100

fprintd (0.9.0-1) unstable; urgency=medium

  * Team upload.
  * New upstream release
  * Add debian/gbp.conf file
  * debian/control: Update the Vcs-* fields, it's now hosted on salsa
  * debian/patches/remove_unneeded_systemd_check.patch: Do not check the
    version of systemd at build-time, this is not needed
  * fprint-doc: Add a symlink in /usr/share/doc and adjust the .doc-base file
    to please lintian
  * debian/control: Bump Standards-Version to 4.4.1 (no further changes)
  * Bump debhelper compatibility to 12, switch to dh_missing
  * Install the daemon in /usr/libexec/ now that the policy allows it

 -- Laurent Bigonville <bigon@debian.org>  Sat, 11 Jan 2020 12:54:27 +0100

fprintd (0.8.1-1) unstable; urgency=medium

  * Team upload.
  * New upstream release
  * debian/control: Bump Standards-Version to 4.2.1 (no further changes)
  * debian/watch: Point to freedesktop gitlab

 -- Laurent Bigonville <bigon@debian.org>  Sat, 08 Sep 2018 11:23:58 +0200

fprintd (0.8.0-2) unstable; urgency=medium

  * Team upload.
  * Do not add libpam-fprintd to the common-auth PAM service, existing
    installation shouldn't be affected. This will also mitigate bug #719004,
    adding the module to common-auth by default doesn't sound like a good idea
    in the first place as further configuration is probably needed anyway.
    (Closes: #881186)
  * debian/control:
    - Move the package to Priority: optional, the extra priority is deprecated
    - Bump Standards-Version to 4.1.1 (no further changes)
  * debian/rules: Use ?= operator instead of := when assigning DEB_HOST_ARCH,
    thanks to lintian

 -- Laurent Bigonville <bigon@debian.org>  Wed, 08 Nov 2017 19:23:05 +0100

fprintd (0.8.0-1) unstable; urgency=medium

  * Team upload.
  * New upstream release
  * debian/control: Add rename to the build-dependencies (Closes: #874040)
  * debian/control: Bump Standards-Version to 4.1.0 (no further changes)
  * Bump Debhelper compatibility to 10
  * debian/rules: Rely on dh_autoreconf instead of calling autotools manually

 -- Laurent Bigonville <bigon@debian.org>  Wed, 13 Sep 2017 18:07:00 +0200

fprintd (0.7.0-1) unstable; urgency=medium

  * Team upload.
  * New upstream release
    - Drop debian/patches/ufa31b0a-update-translations-add-21-of-them.patch,
      applied upstream
  * Move fprintd daemon from /usr/sbin to /usr/lib/fprintd directory, the
    daemon is not supposed to be run manually by users
  * debian/control: Use https for Vcs-* and Homepage fields to please lintian
  * debian/rules: Move the --fail-missing flag from dh call to dh_install ones
  * Add debian/watch file

 -- Laurent Bigonville <bigon@debian.org>  Fri, 02 Dec 2016 18:09:53 +0100

fprintd (0.6.0-2.1) unstable; urgency=low

  * Non-maintainer upload.
  * Add intltool to build-dep, preparing for the deprecation of gnome-common,
    Fixes FTBFS. (Closes: #837823).

 -- gustavo panizzo <gfa@zumbi.com.ar>  Mon, 24 Oct 2016 20:40:42 +0800

fprintd (0.6.0-2) unstable; urgency=medium

  [ Santiago Vila ]
  * Fix FTBFS when building arch-indep only (Closes: #806026)

  [ Didier Raboud ]
  * Bump S-V to 3.9.8 without changes needed

 -- Didier Raboud <odyx@debian.org>  Wed, 08 Jun 2016 21:32:01 +0200

fprintd (0.6.0-1) unstable; urgency=medium

  * New 0.6.0 upstream release

  * Update patches:
    - Backport the upstream translation update for 0.6.0
    - Drop the syntax error fix in fprintd.pod patch, which was from upstream
  * Uses a wildcard match to install the translation files
  * Bump libfprint Build-Depends to 0.6

  [ Barak A. Pearlmutter ]
  * Fix two typos in package descriptions (Closes: #752377)

 -- Didier Raboud <odyx@debian.org>  Wed, 06 May 2015 18:17:08 +0200

fprintd (0.5.1-1) unstable; urgency=low

  * New 0.5.1 upstream release (Closes: #721717)

  [ Didier Raboud ]
  * Drop 'max_tries and timeout' patch, incorporated upstream
  * Bump libfprint-dev Build-Depends to 0.5.1
  * Backport bugfix from upstream:
    - data: Fix syntax error in fprintd.pod

  [ Michael Biebl ]
  * Install systemd service file (Closes: #717767)
    - point to correct systemdsystemunitdir in CONFIG_ARGS
    - update 0_put_fprint_daemon_in_sbin to correct the systemd unit
      file

 -- Didier Raboud <odyx@debian.org>  Sun, 29 Sep 2013 15:37:35 +0200

fprintd (0.5.0-1) unstable; urgency=low

  * New 0.5.0 upstream release.
  * Replace our 'max_tries and timeout' patch with the cleaned version
    accepted by upstream.

 -- Didier Raboud <odyx@debian.org>  Sat, 18 May 2013 17:46:02 +0200

fprintd (0.4.1-20-g9ea025d-1) experimental; urgency=low

  * New upstream git snapshot including many translation fixes.

  [ Luca Capello ]
  * debian/libpam-fprintd.docs:
    + add upstream README (Closes: #680050).

  [ Didier Raboud ]
  * Bump libfprint-dev Build-Depends to 0.5.0-2~.
  * Install new translations.
  * Bump Standards-Version to 3.9.4 without changes needed.

 -- Didier Raboud <odyx@debian.org>  Sun, 03 Mar 2013 13:04:41 +0100

fprintd (0.4.1-5-g73edad0-3) unstable; urgency=low

  * Upload to unstable.
  * Build in verbose mode.

 -- Didier Raboud <odyx@debian.org>  Sun, 27 May 2012 18:28:38 +0200

fprintd (0.4.1-5-g73edad0-2) experimental; urgency=low

  * Fix typo in FingerForce maintainer address.

 -- Didier Raboud <odyx@debian.org>  Mon, 14 May 2012 23:09:47 +0200

fprintd (0.4.1-5-g73edad0-1) experimental; urgency=low

  * Initial release (Closes: #502138, LP: #376540, #346083).
    - Largely inspired from David Jurenka's Ubuntu PPA; thanks to him!

 -- Didier Raboud <odyx@debian.org>  Mon, 14 May 2012 22:07:37 +0200
