PICOTOOL(1)

NAME
picotool - interact with RP2040 devices or binaries

DESCRIPTION

  PICOTOOL:

    Tool for interacting with RP-series device(s) in BOOTSEL mode, or with an RP-series binary

  SYNOPSIS:

    picotool info [-b] [-m] [-p] [-d] [--debug] [-l] [-a] [device-selection] picotool info [-b] [-m] [-p] [-d] [--debug] [-l] [-a] <filename> [-t <type>] picotool config [-s <key> <value>] [-g <group>] [device-selection] picotool config [-s <key> <value>] [-g <group>] <filename> [-t <type>] picotool load [--ignore-partitions] [--family <family_id>] [-p <partition>]

    [-n] [-N] [-u] [-v] [-x] <filename> [-t <type>] [-o <offset>] [device-selection]

    picotool link [--quiet] [--verbose] <outfile> [-t <type>] <infile1> [-t

    <type>] <infile2> [-t <type>] [<infile3>] [-t <type>] [-p] <pad>

    picotool save [-p] [-v] [--family <family_id>] [device-selection] picotool save -a [-v] [--family <family_id>] [device-selection] picotool save -r <from> <to> [-v] [--family <family_id>] [device-selection] picotool erase [-a] [device-selection] picotool erase -p <partition> [device-selection] picotool erase -r <from> <to> [device-selection] picotool verify [device-selection] picotool reboot [-a] [-u] [-g <partition>] [-c <cpu>] [device-selection] picotool otp list|get|set|load|dump|permissions|white-label picotool partition info|create picotool uf2 info|convert picotool version [-s] [<version>] picotool coprodis [--quiet] [--verbose] <infile> [-t <type>] <outfile> [-t

    <type>]

    picotool help [<cmd>]

  COMMANDS:

info
    Display information from the target device(s) or file. Without any arguments, this will display basic information for all connected RP-series devices in BOOTSEL mode

config
    Display or change program configuration settings from the target device(s) or file.

load
    Load the program / memory range stored in a file onto the device.

link
    Link multiple binaries into one block loop.

save
    Save the program / memory stored in flash on the device to a file.

erase
    Erase the program / memory stored in flash on the device.

verify
    Check that the device contents match those in the file.

reboot
    Reboot the device

otp Commands related to the RP2350 OTP (One-Time-Programmable) Memory

partition
    Commands related to RP2350 Partition Tables

uf2 Commands related to UF2 creation and status

version
    Display picotool version

coprodis
    Post-process coprocessor instructions in disassembly files.

help
    Show general help or help for a specific command

Use "picotool help <cmd>" for more info

ERROR: Expected command name before any options

  SYNOPSIS:

    picotool info [-b] [-m] [-p] [-d] [--debug] [-l] [-a] [device-selection] picotool info [-b] [-m] [-p] [-d] [--debug] [-l] [-a] <filename> [-t <type>] picotool config [-s <key> <value>] [-g <group>] [device-selection] picotool config [-s <key> <value>] [-g <group>] <filename> [-t <type>] picotool load [--ignore-partitions] [--family <family_id>] [-p <partition>]

    [-n] [-N] [-u] [-v] [-x] <filename> [-t <type>] [-o <offset>] [device-selection]

    picotool link [--quiet] [--verbose] <outfile> [-t <type>] <infile1> [-t

    <type>] <infile2> [-t <type>] [<infile3>] [-t <type>] [-p] <pad>

    picotool save [-p] [-v] [--family <family_id>] [device-selection] picotool save -a [-v] [--family <family_id>] [device-selection] picotool save -r <from> <to> [-v] [--family <family_id>] [device-selection] picotool erase [-a] [device-selection] picotool erase -p <partition> [device-selection] picotool erase -r <from> <to> [device-selection] picotool verify [device-selection] picotool reboot [-a] [-u] [-g <partition>] [-c <cpu>] [device-selection] picotool otp list|get|set|load|dump|permissions|white-label picotool partition info|create picotool uf2 info|convert picotool version [-s] [<version>] picotool coprodis [--quiet] [--verbose] <infile> [-t <type>] <outfile> [-t

    <type>]

    picotool help [<cmd>]

  COMMANDS:

info
    Display information from the target device(s) or file. Without any arguments, this will display basic information for all connected RP-series devices in BOOTSEL mode

config
    Display or change program configuration settings from the target device(s) or file.

load
    Load the program / memory range stored in a file onto the device.

link
    Link multiple binaries into one block loop.

save
    Save the program / memory stored in flash on the device to a file.

erase
    Erase the program / memory stored in flash on the device.

verify
    Check that the device contents match those in the file.

reboot
    Reboot the device

otp Commands related to the RP2350 OTP (One-Time-Programmable) Memory

partition
    Commands related to RP2350 Partition Tables

uf2 Commands related to UF2 creation and status

version
    Display picotool version

coprodis
    Post-process coprocessor instructions in disassembly files.

help
    Show general help or help for a specific command

Use "picotool help <cmd>" for more info