sleepd (2.15) unstable; urgency=medium

  * Thread’s start_routine must accept a void * argument
    (Closes: #1114383).

 -- Andrej Shadura <andrewsh@debian.org>  Mon, 06 Oct 2025 12:37:11 +0200

sleepd (2.14) unstable; urgency=medium

  * Improve memory usage with up_client_get_devices2 and g_autoptr.

 -- Andrej Shadura <andrewsh@debian.org>  Sat, 12 Apr 2025 11:17:27 +0200

sleepd (2.13) unstable; urgency=medium

  * Reintroduce the package.
  * Remove obsolete preinst.
  * Update copyrights.
  * Set Rules-Requires-Root: binary-targets.
  * Drop dependency on deprecated lsb-base.
  * Stop replacing/providing/conflicting with apm-sleep.
  * Set Homepage to point to Salsa.

 -- Andrej Shadura <andrewsh@debian.org>  Mon, 24 Mar 2025 15:23:36 +0100

sleepd (2.12) unstable; urgency=medium

  * Don’t create a new UPower client on each read.
  * Increase filename buffers to prevent potential overflows.
  * Add systemd service.
  * Remove constraints unnecessary since buster:
    + Build-Depends: Drop versioned constraint on dpkg-dev.
  * Use set -e rather than passing -e on the shebang-line.
  * Update standards version to 4.6.1, no changes needed.

 -- Andrej Shadura <andrewsh@debian.org>  Mon, 24 Mar 2025 14:35:00 +0100

sleepd (2.11) unstable; urgency=medium

  * QA upload.

  [ Jelmer Vernooĳ ]
  * Trim trailing whitespace.
  * Use secure copyright file specification URI.

  [ Ondřej Nový ]
  * d/control: Add Vcs-* field

  [ Debian Janitor ]
  * Use secure URI in Homepage field.
  * Explicitly specify source format.
  * Bump debhelper from old 9 to 12.

  [ Sudip Mukherjee ]
  * Update Standards-Version to 4.5.0
  * Add Pre-Depends.
  * Update compat level to 13.
  * Use canonical URI with Vcs-Git.
  * Fix FTBFS with gcc-10. (Closes: #957810)

 -- Sudip Mukherjee <sudipm.mukherjee@gmail.com>  Fri, 29 May 2020 18:24:44 +0100

sleepd (2.10) unstable; urgency=medium

  * Stop depending on libapm-dev.
  * Update Vcs-Git.

 -- Andrej Shadura <andrewsh@debian.org>  Sun, 16 Sep 2018 11:13:08 +0200

sleepd (2.09) unstable; urgency=medium

  * Port updates for ACPI and UPower backends from wmbattery.

 -- Andrew Shadura <andrewsh@debian.org>  Sun, 30 Aug 2015 13:35:35 +0200

sleepd (2.08) unstable; urgency=medium

  * Fix battery percentage calculation.

 -- Andrew Shadura <andrewsh@debian.org>  Tue, 21 Oct 2014 06:49:01 +0200

sleepd (2.07) unstable; urgency=medium

  * Fix time calculation for acpi backend.
  * Fix upower detection.

 -- Andrew Shadura <andrewsh@debian.org>  Fri, 18 Jul 2014 01:39:09 +0200

sleepd (2.06) unstable; urgency=medium

  * Better AC detection.
  * Support times with upower and acpi.
  * Use the latest upower API.

 -- Andrew Shadura <andrewsh@debian.org>  Fri, 18 Jul 2014 00:23:57 +0200

sleepd (2.05) unstable; urgency=low

  [ Joey Hess ]
  * Stop building with flash-in-the-pan HAL. Instead update acpi
    interface to use /sys/class/power_supply.
    Note that this needs acpica_version 20011018.
    Closes: #613169, #678966
    (Patch developed by Andrew Shadura.)
  * Orphaned the package.

  [ Andrew Shadura ]
  * Add UPower support.
  * Use Debhelper 9, so we can have hardening flags automatically.

 -- Joey Hess <joeyh@debian.org>  Fri, 10 May 2013 18:55:49 -0400

sleepd (2.04) unstable; urgency=low

  * Fix getopt for --force-hal option. Closes: #600168

 -- Joey Hess <joeyh@debian.org>  Wed, 20 Oct 2010 13:38:25 -0400

sleepd (2.03) unstable; urgency=low

  * Add --force-hal option. Closes: #597369

 -- Joey Hess <joeyh@debian.org>  Wed, 06 Oct 2010 20:08:54 -0400

sleepd (2.02) unstable; urgency=low

  * Improve eventmonitor thread, to be both more correct and use
    fewer resources. Thanks, Jeff Strunk
  * debian/init: Stop in runlevels 0 and 6.

 -- Joey Hess <joeyh@debian.org>  Tue, 29 Jun 2010 17:28:03 -0400

sleepd (2.01) unstable; urgency=low

  * Fix init script to not declare hard dependencies on dbus and
    hal. Closes: #548624

 -- Joey Hess <joeyh@debian.org>  Sun, 27 Sep 2009 21:36:06 -0400

sleepd (2.00) unstable; urgency=low

  * Jeff Strunk contributed support for monitoring /dev/input/event*
    files, to better support USB keyboards etc. Closes: #147678
    This is now used by default, in addition to checking interrupts.
  * Jeff also added support for checking the utmp for idle times,
    for checking the system's load average, and for monitoring
    a network device for activity. None done by default.
  * Use pm-suspend, rather than hibernate --force, to put the system
    to sleep by default.

 -- Joey Hess <joeyh@debian.org>  Tue, 26 May 2009 17:49:55 -0400

sleepd (1.13) unstable; urgency=low

  * Avoid crash by ignoring high irqs greater than 254
    (assumption is these will not be irqs we care about).
    Thanks, Jeff Strunk.
  * Debhelper 7, minimal rules file.
  * Update copyright file.

 -- Joey Hess <joeyh@debian.org>  Tue, 12 May 2009 14:34:49 -0400

sleepd (1.12) unstable; urgency=low

  * Write status back out to control file when resume from manual sleep causes
    sleeping to be re-enabled, so that sleepctl will see the correct status
    in this case. Closes: #501708

 -- Joey Hess <joeyh@debian.org>  Thu, 09 Oct 2008 16:22:40 -0400

sleepd (1.11) unstable; urgency=low

  * Tweak acpi/hal backend chosing logic to deal with being started before
    hal on a system without acpi power info. Closes: #494912
  * Make init script depend on hal and move init script sequence number to
    after hal for new installs. Both changes avoid warning message in syslog,
    but the change above makes it ok if old installs don't follow suite.

 -- Joey Hess <joeyh@debian.org>  Tue, 12 Aug 2008 22:58:02 -0400

sleepd (1.10) unstable; urgency=low

  * If sleepd is only being used to sleep on low battery, avoid reading
    /proc/interrupts at all.
  * Avoid sleeping if the battery is absent.
    (This includes simplehal reporting it as absent because hal has died.)

 -- Joey Hess <joeyh@debian.org>  Tue, 17 Jun 2008 19:11:45 -0400

sleepd (1.9) unstable; urgency=low

  * Fix -s. Closes: #469408

 -- Joey Hess <joeyh@debian.org>  Tue, 04 Mar 2008 20:50:03 -0500

sleepd (1.8) unstable; urgency=low

  * Pass KILL to killproc. Closes: #469406

 -- Joey Hess <joeyh@debian.org>  Tue, 04 Mar 2008 20:20:02 -0500

sleepd (1.7) unstable; urgency=low

  * Magic header file reordering to work around the disgusting
    linux-libc-dev/libc headers conflicts (#435700). Closes: #468070

 -- Joey Hess <joeyh@debian.org>  Wed, 27 Feb 2008 15:08:55 -0500

sleepd (1.6) unstable; urgency=low

  * Use hibernate as the default sleep command when using hal, same as for
    raw acpi.
  * Make init script depend on dbus, to avoid sleepd getting confused
    if dbus is stopped.

 -- Joey Hess <joeyh@debian.org>  Thu, 21 Feb 2008 01:03:51 -0500

sleepd (1.5) unstable; urgency=low

  * Don't spew error messages if optional hal properties are not available.
  * Add hal to recommends.
  * Support reconnecting to hal if the connection is closed, as happens
    if the hal is restarted.

 -- Joey Hess <joeyh@debian.org>  Wed, 20 Feb 2008 22:29:58 -0500

sleepd (1.4) unstable; urgency=low

  * Only register the init script to stop sleepd at runlevel 1. The general
    process killer will handle killing it cleanly in runlevels 0 and 6.
  * Run stop script at point 80 instead of 20, to be symmetric with the point
    it's started.
  * These changes will only take effect for new installs of the package,
    to avoid clobbering local changes.
  * Merge HAL support from wmbattery. Support for the old kernel interfaces
    (APM, ACPI, etc) is still present, but to use new interfaces such
    2.6.24's /sys/class/power_adapter, you'll have to have dbus and hal.

 -- Joey Hess <joeyh@debian.org>  Fri, 01 Feb 2008 21:36:11 -0500

sleepd (1.3.16) unstable; urgency=low

  * Correct issue with the statically allocated string returned by
    get_acpi_value that caused it to only look at last full capacity and never
    really at design capacity.

 -- Joey Hess <joeyh@debian.org>  Sat, 22 Dec 2007 22:26:50 -0500

sleepd (1.3.15) unstable; urgency=low

  * Guard some divisions against division by zero. I've never seen that
    happen and can't reproduce it, but see #454766.
  * Merge acpi change from procmeter3: Limit string length when reading from
    /proc/.

 -- Joey Hess <joeyh@debian.org>  Fri, 07 Dec 2007 14:57:08 -0500

sleepd (1.3.14) unstable; urgency=low

  * Merge another acpi fix from wmbattery.

 -- Joey Hess <joeyh@debian.org>  Sun, 02 Dec 2007 15:50:38 -0500

sleepd (1.3.13) unstable; urgency=low

  * Merge acpi change from wmbattery to deal with batteries that report
    a last charged and current capacity larger than their design capacity.

 -- Joey Hess <joeyh@debian.org>  Tue, 23 Oct 2007 22:11:59 -0400

sleepd (1.3.12) unstable; urgency=low

  * Repository moved from svn to git.

 -- Joey Hess <joeyh@debian.org>  Fri, 19 Oct 2007 21:09:22 -0400

sleepd (1.3.11) unstable; urgency=low

  * Fix bug in nostrip support. Closes: #438023

 -- Joey Hess <joeyh@debian.org>  Wed, 15 Aug 2007 13:34:11 -0400

sleepd (1.3.10) unstable; urgency=low

  * LSB init patch from Pere. Closes: #432070

 -- Joey Hess <joeyh@debian.org>  Sat, 07 Jul 2007 20:08:39 -0400

sleepd (1.3.9) unstable; urgency=low

  * Correct off-by-one in acpi.c
  * Clarify copyright is GPL 2 or higher.
  * Update urls to new web page.
  * Remove duplicate recommends line.

 -- Joey Hess <joeyh@debian.org>  Fri, 18 May 2007 13:52:25 -0400

sleepd (1.3.8) unstable; urgency=low

  * Minor bug fix to acpi code, don't skip over dotfiles.
  * Patch from Vincent Bernat adding support for 2.6.21, which changes
    yet again where the ACPI version number is stored. Closes: #423612

 -- Joey Hess <joeyh@debian.org>  Wed, 24 Jan 2007 22:20:44 -0500

sleepd (1.3.7) unstable; urgency=low

  * Add back missing eval in start_daemon call to fix a quoting problem in
    PARAMS caused by the switch to lsb scripts. Closes: #387122

 -- Joey Hess <joeyh@debian.org>  Mon, 18 Sep 2006 15:29:16 -0400

sleepd (1.3.6) unstable; urgency=low

  * Use lsb-base logging functions and add lsb init script comment cruft to
    init script.

 -- Joey Hess <joeyh@debian.org>  Sat, 26 Aug 2006 19:17:46 -0400

sleepd (1.3.5) unstable; urgency=low

  * Patch from Christian Schäfer to add support for using on acpi systems
    with no batteries. This includes a change to acpi_read in acpi.c.

 -- Joey Hess <joeyh@debian.org>  Thu, 30 Mar 2006 15:09:37 -0500

sleepd (1.3.4) unstable; urgency=low

  * Rebuilt with fixed debhelper to fix exit 0 bug in maint scripts.

 -- Joey Hess <joeyh@debian.org>  Wed, 22 Mar 2006 19:42:48 -0500

sleepd (1.3.3) unstable; urgency=low

  * Fix arch all/any confusion. Closes: #358169

 -- Joey Hess <joeyh@debian.org>  Tue, 21 Mar 2006 14:15:58 -0500

sleepd (1.3.2) unstable; urgency=low

  * Fix missing break in --hibernate-command parsing. Closes: #352770

 -- Joey Hess <joeyh@debian.org>  Tue, 14 Feb 2006 10:47:07 -0500

sleepd (1.3.1) unstable; urgency=low

  * Fix incorrect detection of plug swap events.

 -- Joey Hess <joeyh@debian.org>  Sat, 11 Feb 2006 18:42:35 -0500

sleepd (1.3.0) unstable; urgency=low

  * On acpi systems, default to "hibernate --force" if no sleep command
    is specified.
  * No longer go to sleep while on AC power unless --ac-unused is set.
    Closes: #100087
  * Recommend hibernate | apmd.
  * Adjusted some bits like the init script that claimed it was APM specific.
  * Fix path to control file on sleepctl man page.
  * Patch based on a patch by Wolfgang Karall to add a --hibernate-command
    option, which can be used to specify a different command to run when
    the battery is low vs when sleeping due to inactivity.
  * Treat AC plug/unplug events as activity. Closes: #348386
  * Allow specifying a --battery number of 0, which was previously invalid.
    May be useful on hardware where the acpi battery calculations fall below
    zero when the battery is very depleted, to make the system sleep at the
    very last minute. This is experimental.
  * Merge in changes from procmeter3's version of acpi.c, made by Andrew M.
    Bishop, that avoid the ugly chdir to /proc/acpi and add a bit of error
    checking. Now fully synced with procmeter3 3.4d and wmbattery 2.24.
  * Patch from Stephen Gildea to acpi.c to deal with his laptop, which
    sometimes reports the battery is discharging when when it's plugged in,
    so discharge status cannot be used to imply offline status.
  * Slightly modified patch to still avoid calling on_ac_power() in
    obvious cases.
  * Also, logic error fix to the zero batteries implies it must be plugged in
    code.
  * Rewrote package description.
  * Make arch all, since libapm-dev is now available on all arches.

 -- Joey Hess <joeyh@debian.org>  Mon, 30 Jan 2006 17:57:34 -0500

sleepd (1.2.16) unstable; urgency=low

  * Fix XSIisms in preinst.
  * Current standards version.

 -- Joey Hess <joeyh@debian.org>  Sun, 18 Dec 2005 17:32:51 -0500

sleepd (1.2.15) unstable; urgency=low

  * Fix bashisms in init script.
  * Reindent init script.

 -- Joey Hess <joeyh@debian.org>  Sun, 27 Nov 2005 23:26:13 -0500

sleepd (1.2.14) unstable; urgency=low

  * Patch from Stephen Gildea to add --and option.

 -- Joey Hess <joeyh@debian.org>  Sat, 22 Oct 2005 16:05:28 -0400

sleepd (1.2.13) unstable; urgency=low

  * Fix init script so restart works if PARAMS includes quotes.
    Thanks, Luigi Bai. Closes: #311406
  * Sync acpi code with wmbattery 2.22, to avoid the ugly chdir to /proc/acpi
    and add a bit of error checking.

 -- Joey Hess <joeyh@debian.org>  Fri, 17 Jun 2005 14:01:27 -0400

sleepd (1.2.12) unstable; urgency=low

  * Add ppc64 to arch list. Closes: #301091

 -- Joey Hess <joeyh@debian.org>  Fri, 25 Mar 2005 09:20:49 -0500

sleepd (1.2.11) unstable; urgency=low

  * Run PARAMS through one extra variable expansion in the start-stop-daemon
    call to allow it to contain multiple settings, and quoted strings such
    as --sleep-command 'apm -S'

 -- Joey Hess <joeyh@debian.org>  Wed, 23 Jun 2004 20:51:14 -0400

sleepd (1.2.10) unstable; urgency=low

  * Add amd64 to the arch list. Closes: #252537

 -- Joey Hess <joeyh@debian.org>  Fri,  4 Jun 2004 14:47:42 -0300

sleepd (1.2.9) unstable; urgency=low

  * Sync acpi with wmbattery 2.19 for 2.6 kernel support. Closes: #228113

 -- Joey Hess <joeyh@debian.org>  Mon, 19 Jan 2004 12:18:12 -0500

sleepd (1.2.8) unstable; urgency=low

  * Only warn once about no keyboard or mouse irqs, not every update.
    Closes: #226389, although it still probably has 2.6 kernel issues.

 -- Joey Hess <joeyh@debian.org>  Tue,  6 Jan 2004 20:05:06 -0500

sleepd (1.2.7) unstable; urgency=low

  * Recognise i8042 in /proc/interrupts as a keyboard/mouse. 2.5 kernels
    report by chipset apparently. Update documentation with more detials.
    Closes: #193183

 -- Joey Hess <joeyh@debian.org>  Tue, 13 May 2003 17:07:40 -0400

sleepd (1.2.6) unstable; urgency=low

  * Added apm.h with newer apm symbols needed to build sleepd on older
    systems.

 -- Joey Hess <joeyh@debian.org>  Mon, 16 Sep 2002 13:50:01 -0400

sleepd (1.2.5) unstable; urgency=low

  * sync acpi.c with wmbattery 2.11. Cf #152356

 -- Joey Hess <joeyh@debian.org>  Wed, 10 Jul 2002 16:11:57 -0400

sleepd (1.2.4) unstable; urgency=low

  * Updated acpi.c from wmbattery 2.10. Cf #149715

 -- Joey Hess <joeyh@debian.org>  Tue, 11 Jun 2002 22:55:32 -0400

sleepd (1.2.3) unstable; urgency=low

  * Use debhelper v4.
  * DEB_BUILD_OPTIONS support.

 -- Joey Hess <joeyh@debian.org>  Sat,  1 Jun 2002 21:36:26 -0400

sleepd (1.2.2) unstable; urgency=low

  * Don't crash if there is a /proc/acpi/ with no status file.

 -- Joey Hess <joeyh@debian.org>  Fri, 31 May 2002 21:36:51 -0400

sleepd (1.2.1) unstable; urgency=low

  * Added ${misc:Depends}, for versioned dep on sysvinit for invoke-rc.d.

 -- Joey Hess <joeyh@debian.org>  Mon, 27 May 2002 11:32:37 -0400

sleepd (1.2.0) unstable; urgency=low

  * ACPI support. Have to use software suspend to sleep though (unless you're
    Linus or something), and so there is some manual tweaking required.
  * Changed the default check period to 10 seconds, as ACPI is a mite more
    expensive, and anything under a minute should really be fine.
  * Support use of -b w/o -U flag.
  * Support -u 0 to disable idle checking.
  * Made -s actually work.
  * debhelper v4

 -- Joey Hess <joeyh@debian.org>  Fri, 24 May 2002 13:28:47 -0400

sleepd (1.1.10) unstable; urgency=low

  * Link with shared apmd library, now that there is one.

 -- Joey Hess <joeyh@debian.org>  Sun, 24 Feb 2002 12:33:57 -0500

sleepd (1.1.9) unstable; urgency=low

  * Renamed this package and the daemon from apm-sleep to sleepd,
    after observing that apmsleep is a program in the apm package.
    Anyway, daemons should end in 'd'.
  * Remove any sleepd.ctl on purge.
  * The magic in the preinst should transition both conffiles transparently
    to the admin.

 -- Joey Hess <joeyh@debian.org>  Fri, 16 Nov 2001 18:30:39 -0500

apm-sleep (1.1.8) unstable; urgency=low

  * So sparc has apmd now. Closes: #106764

 -- Joey Hess <joeyh@debian.org>  Thu, 26 Jul 2001 22:31:40 -0400

apm-sleep (1.1.7) unstable; urgency=low

  * Limit arches to those that have apmd.

 -- Joey Hess <joeyh@debian.org>  Mon,  2 Jul 2001 22:34:57 -0400

apm-sleep (1.1.6) unstable; urgency=low

  * sleepctl status now says if the daemon is not running

 -- Joey Hess <joeyh@debian.org>  Fri, 22 Jun 2001 22:22:43 -0400

apm-sleep (1.1.5) unstable; urgency=low

  * Fixed two typos that prevented it from ever sleeping except in low
    power situations.

 -- Joey Hess <joeyh@debian.org>  Thu, 21 Jun 2001 21:30:35 -0400

apm-sleep (1.1.4) unstable; urgency=low

  * Moved the apm-sleep control file to /var/run/, so it is removed on
    reboots. I want the control data to persist accross daemon restarts,
    but not reboots.

 -- Joey Hess <joeyh@debian.org>  Fri, 15 Jun 2001 20:37:33 -0400

apm-sleep (1.1.3) unstable; urgency=low

  * Added -b flag to make the system go to sleep if the battery gets low.
  * Recommends apmd.

 -- Joey Hess <joeyh@debian.org>  Sun, 10 Jun 2001 23:16:56 -0400

apm-sleep (1.1.2) unstable; urgency=low

  * More sane IPC.

 -- Joey Hess <joeyh@debian.org>  Thu,  7 Jun 2001 18:59:30 -0400

apm-sleep (1.1.1) unstable; urgency=low

  * Added a status command to sleepctl.

 -- Joey Hess <joeyh@debian.org>  Wed,  6 Jun 2001 03:27:17 -0400

apm-sleep (1.1.0) unstable; urgency=low

  * Added sleepctl program.
  * Removed bogus changelog entry that was meant for wmbattery (so _that's_
    where the mysterious missing changelog entry went!).

 -- Joey Hess <joeyh@debian.org>  Mon,  4 Jun 2001 23:35:06 -0400

apm-sleep (1.0.3) unstable; urgency=low

  * Made the init script ensure that the apm module is loaded by
    touching /dev/apm_bios. Closes: #95792

 -- Joey Hess <joeyh@debian.org>  Mon, 30 Apr 2001 13:21:14 -0400

apm-sleep (1.0.2) unstable; urgency=low

  * Clean up .o file, Closes: #85608

 -- Joey Hess <joeyh@debian.org>  Sun, 11 Feb 2001 15:31:34 -0800

apm-sleep (1.0.1) unstable; urgency=low

  * Debhelper installs the default file now for me.

 -- Joey Hess <joeyh@debian.org>  Fri,  9 Feb 2001 18:16:17 -0800

apm-sleep (1.0) unstable; urgency=low

  * Added install target to Makefile.
  * Added local website mantainance install-hook in.
  * Created a website.
  * Added another copy of the GPL to my cvs repository. Sigh.
  * Added INSTALL document.
  * First public release outside Debian.

 -- Joey Hess <joeyh@debian.org>  Wed,  7 Feb 2001 22:16:54 -0800

apm-sleep (0.5) unstable; urgency=low

  * I discovered that apm-sleep would run before X or gpm were started, and
    there would be no mouse irq in the list, so it would not autoprobe it.
    The fix is to make it autoprobe for keyboard and mouse every time
    through the main loop. I do this with pretty little additional
    overhead, really. It should also make autoprobing work if a device is
    connected or enabled or whatever when the daemon is running (I'm
    thinking USB..) Closes: #80173

 -- Joey Hess <joeyh@debian.org>  Thu, 21 Dec 2000 17:32:05 -0800

apm-sleep (0.4) unstable; urgency=low

  * Patch from Stephen Rothwell <sfr@linuxcare.com.au> to:
    - add ac-unused option
    - add some paramater checking
    - add check-time option
  * Added a new TODO item to replace the one Steven did.
  * Build-depends on apmd now.
  * Modified above patch a bit. -U 0 will disable sleep completly
    when on wall power, and if -U is not specified, it defaults to
    using whatever the regular suspend time is.

 -- Joey Hess <joeyh@debian.org>  Tue, 12 Dec 2000 22:59:12 -0800

apm-sleep (0.3) unstable; urgency=low

  * Fixed a fd leak that eventually crashed the program.

 -- Joey Hess <joeyh@debian.org>  Sat,  9 Dec 2000 01:40:34 -0800

apm-sleep (0.2) unstable; urgency=low

  * Added /etc/default/ file.

 -- Joey Hess <joeyh@debian.org>  Sun,  3 Dec 2000 17:59:08 -0800

apm-sleep (0.1) unstable; urgency=low

  * First release.

 -- Joey Hess <joeyh@debian.org>  Sat,  2 Dec 2000 22:08:01 -0800
