 idVendor: 0x0BF8
  iManufacturer: FujitsuTechnologySolutions GmbH
 idProduct: 0x1017
  iProduct: SmartCase KB SCR eSIG
 bcdDevice: 1.21 (firmware release?)
 bLength: 9
 bDescriptorType: 4
 bInterfaceNumber: 1
 bAlternateSetting: 0
 bNumEndpoints: 3
  bulk-IN, bulk-OUT and Interrupt-IN
 bInterfaceClass: 0x0B [Chip Card Interface Device Class (CCID)]
 bInterfaceSubClass: 0
 bInterfaceProtocol: 0
  bulk transfer, optional interrupt-IN (CCID)
 iInterface: SmartCase Smartcard Reader
 CCID Class Descriptor
  bLength: 0x36
  bDescriptorType: 0x21
  bcdCCID: 1.10
  bMaxSlotIndex: 0x00
  bVoltageSupport: 0x01
   5.0V
  dwProtocols: 0x0000 0x0003
   T=0
   T=1
  dwDefaultClock: 4.800 MHz
  dwMaximumClock: 8.000 MHz
  bNumClockSupported: 0 (will use whatever is returned)
   Support 4800 kHz
   Support 6000 kHz
   Support 8000 kHz
   Support 12000 kHz
  dwDataRate: 12903 bps
  dwMaxDataRate: 307200 bps
  bNumDataRatesSupported: 0 (will use whatever is returned)
   Support 12903 bps
   Support 25806 bps
   Support 51613 bps
   Support 103226 bps
   Support 10753 bps
   Support 21505 bps
   Support 43011 bps
   Support 86022 bps
  dwMaxIFSD: 252
  dwSynchProtocols: 0x00000000
  dwMechanical: 0x00000001
   Card accept mechanism
  dwFeatures: 0x000100BA
   ....02 Automatic parameter configuration based on ATR data
   ....08 Automatic ICC voltage selection
   ....10 Automatic ICC clock frequency change according to parameters
   ....20 Automatic baud rate change according to frequency and Fi, Di params
   ....80 Automatic PPS made by the CCID
   01.... TPDU level exchange
  dwMaxCCIDMessageLength: 271 bytes
  bClassGetResponse: 0xFF
   echoes the APDU class
  bClassEnvelope: 0xFF
   echoes the APDU class
  wLcdLayout: 0x0000
  bPINSupport: 0x03
   PIN Verification supported
   PIN Modification supported
  bMaxCCIDBusySlots: 1
